It was surprisingly easy to Install Blink Doorbell on Brick Without Drilling because Installing a Blink Doorbell on my brick wall was something I thought would be difficult.
After doing some research online, I discovered that there is an innovative way to install the doorbell without drilling into the brick – using specialized mounting brackets and adhesive strips.
I was amazed at how quickly and easily I could install my new doorbell. In this article, I’m going to share with you exactly what steps I took so that you can easily do the same for your home.
Let’s get started!
How to Install Blink Doorbell on Brick Without Drilling
Drilling is essential to install any video doorbell; it provides you better security and an excellent grip on the wall.
However, if you want to install your Blink doorbell without drilling, you must purchase an adhesive mounting bracket for your Blink.
It can be used to install the doorbell without drilling holes in your brick wall. You should follow the below steps to install it.
Here are the steps to install your Blink video doorbell on brick without drilling.
1. Take an adhesive no-drill mount and then mount the backplate to this adhesive mount with provided little screws.
2. Next, mount the doorbell to its backplate; by pushing in the top part first and then the bottom until it clicks firmly in place.
3. Once you’ve done this, peel off the protective cover to reveal adhesive underneath.
4. And then carefully attach it to the brick or wall where you want and put some pressure on it.
This way, you can easily install your Blink doorbell camera without drilling on any kind of surface, like a door or brick.
Can you attach a blink doorbell without screws?
Yes, you can install a Blink doorbell without a screw; you just need to buy a no-drill or adhesive mount.
It is really simple to install the doorbell; you have to put the backplate on the no-drill mount and then the doorbell.
Once you set up the doorbell on this mount, peel off the protective cover to reveal the adhesive underneath and install it on the wall or your door.
How do you mount a blinking doorbell to a brick?
Here are the steps to install your Blink video doorbell to brick.
1. First, remove the existing doorbell if you’ve already installed it.
2. Put the mounting bracket on the wall and mark the holes.
3. Then drill the mounting holes > drill about 1.5 inches in.
4. Insert anchors into the hole, put the mounting plate, and secure it with screws.
5. Loosen the contact screw at the back of your doorbell, and connect your existing wires to it.
6. Lastly, mount the doorbell; hock the top first and pull straight down to lock it in place.
Did I Miss Something
Now I’d like to hear from you!
Does this method help you to install your Blink video doorbell without drilling?
Let me know in the comment right now.
You May Like Reading:
Blink Camera Disarmed Vs Armed
Is A Humming Doorbell Dangerous (Understand Risks!)
